Get A Quote

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit

Back to Overview

Technical knowledge | Quick investigation on the reason why the main machine of the track rope saw machine does not respond when starting up

Aug 17,2026

Problems encountered during cutting of track rope saw machine (can be submitted)

Many craftsmen have encountered this problem during construction: the remote control screen of the track rope saw machine shows everything is normal, but when the start button is pressed, the main motor has no response. Many people's first reaction is to determine that the motor is damaged, but in fact, the root cause of most faults is not in the motor, but in the power supply and control links

 

Based on frontline after-sales maintenance experience, the following issues can be checked:

 

1. The switch power supply is damaged - simply replace the switch power supply

2. Low Remote Control Battery - Replace the remote control battery and observe if there is any signal feedback on the screen when operating the remote control

3. Contactor phase loss - simply replace the contactor

4. Power phase loss - Check the power supply

After troubleshooting each item, if the equipment still cannot be started, please immediately turn off the power and contact the manufacturer's after-sales personnel for on-site maintenance. Do not repeatedly turn on the machine for testing to avoid the fault expanding and delaying the construction period!

The reference picture of the tracked electric rope saw machine is as follows:

Contact Us

E-mail

Phone/WhatsApp

Address

Chuangfu Street, Xingtang Economic Development Zone, Shijiazhuang, Hebei Province, China